Make sure that the F5 is running in “Volume Partition” mode. “lvscan” within bash should provide output like this:
config # lvscan
ACTIVE ‘/dev/vg-db-sda/dat.share.1’ [30.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/dat.log.1’ [7.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/dat.swapvol.1’ [1.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.1.root’ [392.00 MB] normal
ACTIVE ‘/dev/vg-db-sda/set.1._usr’ [2.48 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.1._config’ [3.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.1._var’ [3.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.2.root’ [256.00 MB] normal
ACTIVE ‘/dev/vg-db-sda/set.2._usr’ [1.34 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.2._config’ [512.00 MB] normal
ACTIVE ‘/dev/vg-db-sda/set.2._var’ [3.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.3.root’ [256.00 MB] normal
ACTIVE ‘/dev/vg-db-sda/set.3._usr’ [1.34 GB] normal
ACTIVE ‘/dev/vg-db-sda/set.3._config’ [512.00 MB] normal
ACTIVE ‘/dev/vg-db-sda/set.3._var’ [3.00 GB] normal
ACTIVE ‘/dev/vg-db-sda/dat.maint.1’ [300.00 MB] normal
Make sure there are no HTTP Classes in your configuration, other than the default “httpclass” by checking Local Traffic ›› Profiles : Protocol : HTTP Class from the F5 GUI.
Make sure that there are no spaces in profile naming. SOL15144
As a precaution, go through your configuration and remove any unwanted/unused configuration elements like a “Test Virtual Server” or configuration from the past that is not in use at the moment.
Load the code version to the F5 LTM via GUI, SCP or any other preferred method.
If not, the maintenance would include a license re-activation step before proceeding with code upgrade. This step would take about 10-20 minutes.
cpcfg to the new code version location – Example: cpcfg HD1.2
Although “cpcfg HD1.x” has worked most of the times, I would recommend backing up the .UCS file in a remote location and also saving a copy in “/shared/tmp/<UCS File>“. After saving the UCS file in the “/shared/tmp/” location, you can utilize “load /sys ucs <path/to/UCS> no-license” to load the configuration as noted in SOL12880
Reboot. This will take about 20 minutes for the device to load the new configuration and come back up. If you are using HA F5, upgrade the Standby F5 first. It will take a few minutes for the Standby F5 to become “Active”. So, be patient.
Conservative estimate for the maintenance window is about 1 hour. I would recommend giving yourself 90 minutes, if you are not familiar with F5 code upgrade. Downtime can be minimized if you have BigIP F5 in High Availability Active/Standby Pair.